Details: **Ultracompact and incredibly bright, the Preon was the world's first AAA battery powered light with a CREE XP-G LED.**
That means it uses a readily available battery size while achieving surprising brightness. A push-button tail cap controls three brightness levels and four special modes so you can dial in the type of light you need for any situation.
SPECS: - LED Emitter: CREE XP-G2
- Voltage Range: 0.9V-3V
- Spot Beam: Angle: 18.2 Degree / Diameter at 3 meters: 960mm
- Flood Beam: Angle: 81.5 Degree / Diameter at 3 meters: 5.2 meters
- Brightness Levels: Low: 2.2 lumens, 23 hrs / Medium: 26 lumens, 6 hrs / High: 192 lumens, 0.8 hrs
- Special modes: Strobe: 1.6 hrs / SOS: 4.8 hrs / Beacon Hi: 8 hrs / Beacon Lo: 40 hrs
- Textured reflector
#DIMENSIONS: - Length: 5.05 inches
- Body diameter: 0.6 inches
- Head diameter: 0.6 inches
- Weight (without batteries): 0.8 oz
OPERATION: Operating your Preon 2 is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the tailcap is tightened. To turn the Preon on or off simply press the switch on the tailcap. To select a different level of constant output turn the Preon off and then on again within 1 second. This will select the next level of constant output in the following sequence: Low -> Medium -> High. If the Preon is turned off for 2 seconds or longer it will revert back to Low.
- The Preon has 4 special output modes: Strobe / S.O.S. / Beacon (Hi) / Beacon (Lo)
- To access these modes quickly switch through two full cycles of the regular outputs starting with Low. These two full cycles must be completed within 3 seconds: Low,Medium,High x2
